|
|
 |
|
|
The SIMPLEX Advantage
- All inline system valves are rated for 10,000 PSI.
- Very versatile for load holding, controlling, safety reliefs, and adjustable pressures designed for every application.
- All valves have 3/8” NPTF ports.
|
|
|
|
|
|
|
|
V10E
|
Check valve automatically locks load in raised position as plunger is being extended. Protects against dropping the load due to pressure loss. Required for multiple cylinder lifting from one source.
|
|
V10EC
|
Same as the V10E, but with polarized high flow couplers for direct, rapid mounting to cylinder coupler.
|
|
V2
|
Over center check valve can be mounted at the cylinder to hold the load in the event of system failure. Unlike other piloted check valves, the V2 provides controlled retraction without “chatter”. Note: when used in multiple cylinder systems, contact factory for minimum pump requirements.
|
|
V5B
|
Shut off valve is a needle-type valve for sustained load holding and flow control. Use for positive shutoff or throttling
|
|
V1
|
Inline adjustable relief for inline mounting into hydraulic systems. Accurately controls maximum pressure from 800 to 10,000 PSI. turn handle until gauge reads desired pressure - tighten lock nut. Valve automatically opens and bypasses excess flow from system when preset is reached.
|
|
V3
|
Safety relief valve threads into top port of double acting cylinders, or inline on hydraulic systems, for protection against over pressurizing. Pressure rating is 10,500 PSI.
|
|
|
|
|
|
|
